ANTIFREEZE SAFETY SHOWER AND EYEBATH
11009
Acts in a second, protects for a lifetime.
· Combined floor safety shower and eyewash in a single water network-connected unit.
· Galvanised steel structure with safety green finish and AISI 304 stainless steel eyewash bowl.
· 10" ABS showerhead, with a flow rate of 76 L/min and a wide water pattern covering the whole body.
· 12 L/min eyewash through two nozzles for simultaneous rinsing of both eyes and face.
· Nozzles with dust cap, filter, and internal flow regulator: stream delivered clean and at constant pressure.
· 304 stainless steel maintained-opening ball valves, 1" in the shower and 1/2" in the eyewash.
· Activation in under a second and hands-free throughout rinsing.
· Triple operation: pull rod for shower, flag lever or foot pedal for eyewash, accessible even with reduced visibility.
· Working pressure of 0.2 to 0.8 MPa with 1" IPS/NPT water inlet and outlet.
· Manufactured in accordance with EN 15154-1/2 and ANSI Z358.1, and factory pre-assembled for quick installation.
· Combined floor safety shower and eyewash in a single water network-connected unit.
· Galvanised steel structure with safety green finish and AISI 304 stainless steel eyewash bowl.
· 10" ABS showerhead, with a flow rate of 76 L/min and a wide water pattern covering the whole body.
· 12 L/min eyewash through two nozzles for simultaneous rinsing of both eyes and face.
· Nozzles with dust cap, filter, and internal flow regulator: stream delivered clean and at constant pressure.
· 304 stainless steel maintained-opening ball valves, 1" in the shower and 1/2" in the eyewash.
· Activation in under a second and hands-free throughout rinsing.
· Triple operation: pull rod for shower, flag lever or foot pedal for eyewash, accessible even with reduced visibility.
· Working pressure of 0.2 to 0.8 MPa with 1" IPS/NPT water inlet and outlet.
· Manufactured in accordance with EN 15154-1/2 and ANSI Z358.1, and factory pre-assembled for quick installation.
Comprehensive emergency protection in a single unit: 76 L/min shower and 12 L/min eyewash, activating in under a second.
Key differentiator: galvanised steel/AISI 304 construction, triple ergonomic operation, compliance with EN 15154-1/2 and ANSI Z358.1, pre-assembled for swift installation.
The ANTIFREEZE SAFETY SHOWER AND EYEBATH offers complete emergency protection in one spot, maximising operational safety and reducing critical response times. Its high flow rate and broad water pattern ensure effective rinsing of the body, eyes and face, while the nozzles with dust caps, filters and internal regulators maintain a clean and constant stream.
Designed for demanding environments, it combines Quality and Design: galvanised steel structure with AISI 304 eyewash bowl and stainless 304 maintained-opening valves ensuring durability and reliability. Ergonomics are reflected in its triple operation (handle, lever or pedal), activation in under a second and hands-free operation, even with reduced visibility. Factory pre-assembled, it complies with EN 15154-1/2 and ANSI Z358.1, streamlining installation and regulatory compliance.
Usage suggestions: place near chemical hazard points; ensure network pressure is between 0.2 and 0.8 MPa; conduct periodic activation tests and maintain clear and accessible signage.
Acts in a second, protects for a lifetime.
Use cases:
- Chemical, pharmaceutical, and R&D laboratories with splash or aerosol risks.
- Production plants (paints, petrochemicals, batteries) next to mixing, transfer, and cleaning areas.
- Workshops, warehouses, and maintenance zones where solvents or corrosive substances are handled.
Key differentiator: galvanised steel/AISI 304 construction, triple ergonomic operation, compliance with EN 15154-1/2 and ANSI Z358.1, pre-assembled for swift installation.
The ANTIFREEZE SAFETY SHOWER AND EYEBATH offers complete emergency protection in one spot, maximising operational safety and reducing critical response times. Its high flow rate and broad water pattern ensure effective rinsing of the body, eyes and face, while the nozzles with dust caps, filters and internal regulators maintain a clean and constant stream.
Designed for demanding environments, it combines Quality and Design: galvanised steel structure with AISI 304 eyewash bowl and stainless 304 maintained-opening valves ensuring durability and reliability. Ergonomics are reflected in its triple operation (handle, lever or pedal), activation in under a second and hands-free operation, even with reduced visibility. Factory pre-assembled, it complies with EN 15154-1/2 and ANSI Z358.1, streamlining installation and regulatory compliance.
Usage suggestions: place near chemical hazard points; ensure network pressure is between 0.2 and 0.8 MPa; conduct periodic activation tests and maintain clear and accessible signage.
Acts in a second, protects for a lifetime.
Use cases:
- Chemical, pharmaceutical, and R&D laboratories with splash or aerosol risks.
- Production plants (paints, petrochemicals, batteries) next to mixing, transfer, and cleaning areas.
- Workshops, warehouses, and maintenance zones where solvents or corrosive substances are handled.
New
16 other products in the same category:
Tap to zoom
