- New
SELF-INSTALLED LIFELINE KIT FOR 20m METAL SHEET
80190-20
Install in minutes, work safely always.
· Kit for support on any metal roof,
regardless of thickness (can be fixed with
screws to the metal purlins of the roof when
there are sheet thicknesses <0.6 mm)
· Valid for up to 4 simultaneous users
· Easy cable assembly, only with
a 19 mm wrench
· Supplied in kits of 10, 20, and 30 m for
straight lifelines.
· The anchorage line can optionally be
supplied with a sliding device (Trolley)
· Valid for use as a safety lanyard (EN354)
· Kit for support on any metal roof,
regardless of thickness (can be fixed with
screws to the metal purlins of the roof when
there are sheet thicknesses <0.6 mm)
· Valid for up to 4 simultaneous users
· Easy cable assembly, only with
a 19 mm wrench
· Supplied in kits of 10, 20, and 30 m for
straight lifelines.
· The anchorage line can optionally be
supplied with a sliding device (Trolley)
· Valid for use as a safety lanyard (EN354)
Self-installable cable lifeline for metal roofs, safe and versatile for up to 4 users.
Quick installation with a 19 mm wrench and pre-configured kits (10/20/30 m), with option of sliding trolley.
The SELF-INSTALLED LIFELINE KIT FOR 20m SHEET is designed to reliably anchor to any metal roof, even when the sheet is less than 0.6 mm fixed to the purlins. Its engineering prioritises quality and ease of assembly: just a 19 mm wrench for quick, clean, and repeatable installation.
Suitable for up to 4 simultaneous users, this solution optimises work in straight lines, maintaining continuous safety and reducing downtime. The possibility of incorporating a sliding trolley increases movement fluidity and minimises disconnections, improving the ergonomics of work at height.
With kits in standardised lengths and compatibility for use as a lanyard (EN354), it offers an excellent quality-price ratio for maintenance, assembly, and operation of facilities on the roof. Its robust and modular design simplifies inspections and replacements, ensuring operational availability.
Recommended for maintenance technicians, installers, and prevention services seeking reliability with agile assembly and recognised standards.
Install in minutes, work safely always.
Use cases:
- Installation of straight lifelines on sheet metal roofs of industrial warehouses and logistics centres.
- Maintenance of solar panels, air conditioning, and antennas on metal roofs with continuous movement via sliding trolley.
- Inspection and cleaning interventions on light roofs with fixation to purlins when the sheet is <0.6 mm.
Quick installation with a 19 mm wrench and pre-configured kits (10/20/30 m), with option of sliding trolley.
The SELF-INSTALLED LIFELINE KIT FOR 20m SHEET is designed to reliably anchor to any metal roof, even when the sheet is less than 0.6 mm fixed to the purlins. Its engineering prioritises quality and ease of assembly: just a 19 mm wrench for quick, clean, and repeatable installation.
Suitable for up to 4 simultaneous users, this solution optimises work in straight lines, maintaining continuous safety and reducing downtime. The possibility of incorporating a sliding trolley increases movement fluidity and minimises disconnections, improving the ergonomics of work at height.
With kits in standardised lengths and compatibility for use as a lanyard (EN354), it offers an excellent quality-price ratio for maintenance, assembly, and operation of facilities on the roof. Its robust and modular design simplifies inspections and replacements, ensuring operational availability.
Recommended for maintenance technicians, installers, and prevention services seeking reliability with agile assembly and recognised standards.
Install in minutes, work safely always.
Use cases:
- Installation of straight lifelines on sheet metal roofs of industrial warehouses and logistics centres.
- Maintenance of solar panels, air conditioning, and antennas on metal roofs with continuous movement via sliding trolley.
- Inspection and cleaning interventions on light roofs with fixation to purlins when the sheet is <0.6 mm.
- Packaging unit
- CEN/TS 16415
- OK
- EN795C
- OK
Is the inspection of fall-arrest PPE mandatory?
All fall-arrest equipment must undergo a mandatory annual inspection starting from the date of its first use, in accordance with the UNE EN 365:2005 standard. This inspection ensures that the equipment maintains its safety conditions. The user must record the date of first use in the corresponding inspection sheet.
Inspection frequency: Once per year.
Who is authorized to inspect the equipment?
Inspections of Safetop fall-arrest equipment can only be carried out by Safetop or by a Safetop-authorized person.
- Safetop-certified distributors
Only distributors trained and certified by Safetop are authorized to perform inspections of our PPE. This specialized training enables them to identify defects, monitor material condition, and issue valid inspection reports. - Safetop inspection technical service
We offer our own technical inspection service for fall-arrest equipment, exclusively for distributors. End users should not send equipment directly; instead, they must manage it through their supply partner. - Safetop-authorized personnel
Safetop provides technical inspection courses for suppliers, enabling them to become authorized inspection centers.
Safetop Monitor
Manage your equipment, inspections, and expiration dates with our Safetop Monitor application. Centralize technical documentation, inspection notifications, and PPE tracking all in one place.
16 other products in the same category:
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
Tap to zoom
