• New
LIFELINE 20 m, 14 mm diameter with carabiner 80111
LIFELINE 20 m, 14 mm diameter with carabiner 80111

LIFELINE 20 m, 14 mm diameter with carabiner 80111

80152
EN358
Safety that flows, performance that lasts.

· 14 mm polyester diameter lifeline for easily removable additional height.
· Fully cylindrical: easily slides any fall arrest device and prevents dirt adhesion.
· Ends manufactured with thimbles.
· Includes connector Ref. 80111 at one end, with a 19 mm opening and 20 Kn strength; the other end is free for possible connection of a counterweight.
· Available in: 10 m (Ref. 80151), 20 m (Ref. 80152), 30 m (Ref. 80153), 40 m (Ref. 80154), 50 m (Ref. 80155)
 
Maximum safety at height with 20 m lifeline and 14 mm diameter ensuring smooth and controlled sliding.
Its fully cylindrical design reduces dirt accumulation and enhances compatibility with fall arrest devices.

Optimise height protection with a 20 m and 14 mm lifeline made of polyester, designed to work smoothly and uninterruptedly. Its fully cylindrical construction minimises dirt accumulation and favours the sliding of fall arrest devices, prolonging the equipment's lifespan and improving efficiency in every manoeuvre. The ends with thimbles provide robustness and order, while the 80111 connector (19 mm opening, 20 Kn) allows for a quick and secure connection; moreover, the free end admits a counterweight when the setup requires it. A professional quality solution with excellent cost-effectiveness and compatibility with a wide range of accessories.
Suggestions for use: install temporary lines on roofs, set up anchor points with counterweights for specific manoeuvres, or use it as a support for sliding fall arrest devices in industrial maintenance and construction.
Safety that flows, performance that lasts.

Use cases:
- Temporary lifelines on roofs and rooftops for maintenance work
- Industrial maintenance, scaffolding, and work on elevated platforms
- Configurations with counterweights for temporary anchor points
Packaging unit
EN358
OK
EN353-2
OK
EN12841/A
OK

Is the inspection of fall-arrest PPE mandatory?

All fall-arrest equipment must undergo a mandatory annual inspection starting from the date of its first use, in accordance with the UNE EN 365:2005 standard. This inspection ensures that the equipment maintains its safety conditions. The user must record the date of first use in the corresponding inspection sheet.

Inspection frequency: Once per year.



Who is authorized to inspect the equipment?

Inspections of Safetop fall-arrest equipment can only be carried out by Safetop or by a Safetop-authorized person.

  • Safetop-certified distributors
    Only distributors trained and certified by Safetop are authorized to perform inspections of our PPE. This specialized training enables them to identify defects, monitor material condition, and issue valid inspection reports.
  • Safetop inspection technical service
    We offer our own technical inspection service for fall-arrest equipment, exclusively for distributors. End users should not send equipment directly; instead, they must manage it through their supply partner.
  • Safetop-authorized personnel
    Safetop provides technical inspection courses for suppliers, enabling them to become authorized inspection centers.


Safetop Monitor

Manage your equipment, inspections, and expiration dates with our Safetop Monitor application. Centralize technical documentation, inspection notifications, and PPE tracking all in one place.


Budget

 

contact us

 

Customers who bought this product also bought:

16 other products in the same category:

Customers who bought this product also bought:

Product added to wishlist
Product added to compare.